Hydrotech Reverse Osmosis (RO) Drinking Water System

Installed at your Sink – Makes Your water taste great!!
Makes much more water faster than home store units

RO-Hydro75

RO Hydro75
First stage – 5 micron particle pre filter. Removes suspended sediment, dirt&grit.
Second stage – Powdered Activated carbon block pre-filter. Removes chlorine taste, organic tastes and odors. Does not release “carbon fines” into membrane.
Third stagethe Reverse Osmosis membrane. Processes water on the molecular level. Reduces totally dissolved mineral salts. Rated at 75 gallons per day* for fastest recovery and higher flow rate. Compare with Home Store RO’s which make around 15-30 gallons per day.
Fourth stage – Carbon block post filter. Gives water a sweet taste. Canister style (not in-line) for much higher flow rate and higher capacity filtering.

Beautiful matching RO faucets

Makes up to 75 gallons* great tasting water per day.

This unit is innovative in its one piece manifold design, thereby providing a seamless water path with less tubing connections, resulting in much higher flow rate than other RO’s. Far superior in water quality and quantity to Home Store RO’s. Includes matching (We match your existing kitchen faucet) decorative long reach, lead free faucet & NSF 3.2gal. storage tank. Has 3/8″ tubing (instead of ¼”) to storage tank and faucet for higher flow rate. Also has full port ball valve for water supply connection (no needle valve). All Units are bench water tested for leaks. Membranes are pre tested for TDS rejection.

Includes installation by State Licensed Plumber (#422539) with years of experience installing RO’s.

Only $1095.00  – Installed at Kitchen Sink

ALL INSTALLATIONS by California Licensed Plumbing Contractor; with years of experience Installing Reverse Osmosis Systems. 

Joe Stern, CA State Contractor’s Lic #422539

Reverse Osmosis FAQ

Click here for information on commercial reverse osmosis systems.

*RO membranes are rated under laboratory temperature & pressure. NO HEALTH CLAIMS ARE MADE FOR THIS RO. This RO requires home’s water pressure to be in the 40-60 psi range for optimum operation. This unit requires periodic maintenance. Iron above .3mg/L, manganese above .05 mg/L and hardness above 5 grains/gal could make maintenance necessary more often.